Energy Saving Fan Coil Unit Drivers (Controller)
>50% Energy Saving
The micro-electric synchronous motor uses 29W and the speed is 674rpm.
The conventional AC motor uses 95W and the speed is 640rpm. The output of the micro-motor has increased by 5%, while saving 69% . |
微电的同步電機用电29W, 轉速是674rpm。
傳统交流電机用电95W, 轉速是640rpm。 微电 馬達 的出风量提升了5%, 卻同時省电69% |
Integrated mFCS BLDC
Traditional AC Motor VS BLDC
Mictronics Integrated BLDC motor drive is driven by a variable voltage variable frequency source.It can coupled with either traditional 3 speed thermostat or 0~10V stepless control thermostat. mFCS can reduce energy consumption by more than 70% at low speed operation when
compared to traditional AC motors.
compared to traditional AC motors.
Benefits
1.Permanent magnet motor can directly replace the mechanical power 25W to 65W fan coil of single phase AC motor.
2.Motor and electronic drive installation is easy.
3.Suitable for 200CFM to 1400CFM fan coil units.
4.The motor provides distinctive features including high efficiency, low heat generation and long service life.
2.Motor and electronic drive installation is easy.
3.Suitable for 200CFM to 1400CFM fan coil units.
4.The motor provides distinctive features including high efficiency, low heat generation and long service life.
Circuit board
Connection Diagram
Market Value:
1.High Energy Saving Rate:50%~70%
2.Wide Adaptability:
a.Direct replace AC motor from mechanical power 25W ~ 65W
b.Wide input voltage range(110V to 240V);not being affected by fluctuation
of grid voltage
2.Wide Adaptability:
a.Direct replace AC motor from mechanical power 25W ~ 65W
b.Wide input voltage range(110V to 240V);not being affected by fluctuation
of grid voltage
Nomenclature
mFCS-A-B-C-D-E-F
A.3S = 3 Speeds, SL = Stepless Control
B.Motor Power = 120W
C.Input Voltage 110V(100V~127V)
220V(200V~265V)
277V(200V~277V)
D.Axle Diameter 15 = 15mm
14 = 14mm
13 = 1/2 inch,or 13mm
12 = 12mm
E.Motor Mount Height 105 = 105mm
100 = 100mm
F.Single or double axle SR = Single Right
SL = Single Left
D = Double
Driver Dimension
mFCS-A-B-C-D-E-F
B.Motor Power = 120W
C.Input Voltage 110V(100V~127V)
220V(200V~265V)
277V(200V~277V)
D.Axle Diameter 15 = 15mm
14 = 14mm
13 = 1/2 inch,or 13mm
12 = 12mm
E.Motor Mount Height 105 = 105mm
100 = 100mm
F.Single or double axle SR = Single Right
SL = Single Left
D = Double
Driver Dimension
mFCS-A-B-C-D-E-F